EN

Borrowing Capacity & Debt-to-Income Calculator

Before house-hunting or negotiating a loan, one question comes first: how much can actually be borrowed? The answer has nothing to do with wishful thinking and everything to do with a rule applied by every lender: the monthly payment, insurance included, must stay under a set share of income — the debt-to-income ratio, commonly capped around 35 %. This calculator works backward from income to the maximum payment, then to the loan amount, and lays out the cost of credit alongside the income left to live on.

Default example: 3,500 € net income, no existing debt, 3.5 % over 20 years, insurance 0.34 %. The form adjusts to any situation.

Income, debts and loan terms

Income and debts

Net salaries and the steady income a lender will count (part of rental income, pensions…).

Existing loan repayments (car, consumer…). Rent is excluded if it disappears with the purchase.

A common lender guideline: 35 %, insurance included.

Loan terms

Rate excluding insurance (the APR includes insurance and fees).

Often 0.1 to 0.5 % depending on age and profile. Counts towards the ratio.

Adds to the loan to give your total budget.

Results

  • Borrowing capacity 201,383 €
  • Maximum monthly payment (insurance incl.) 1,225 €/mo
  • Residual income (after payments) 2,275 €/mo
  • Total cost of credit 92,617 €
  • Resulting debt-to-income ratio 35.0 %
Payment ceiling (35 % of income)1,225 €/mo
− Existing debt payments0 €/mo
= Payment available for the new loan1,225 €/mo
of which principal + interest1,168 €/mo
of which loan insurance57 €/mo
Borrowing capacity201,383 €
Interest paid over the term78,923 €
Insurance cost over the term13,694 €
Total cost of credit92,617 €
Total amount repaid294,000 €

Capacity = Paymentmax / [ i/(1−(1+i)−n) + a/12 ]

i = monthly rate (annual rate ÷ 12), n = number of payments, a = annual insurance rate. The a/12 term sets aside the insurance premium each month, computed here on the initial capital.

Effect of the term on borrowing capacity

For the same maximum payment (1,225 €/mo), a longer term raises the amount that can be borrowed — but sharply increases the total cost. The trade-off, laid out below:

0 k€125 k€250 k€375 k€500 k€120 k€10 yrs165 k€15 yrs201 k€20 yrs232 k€25 yrs
Borrowing capacity by term, for a fixed monthly payment. The chosen term is highlighted.
TermBorrowing capacityTotal cost of creditCost per 1,000 € borrowed
10 yrs 120,430 € 26,570 € 221 €
15 yrs 164,824 € 55,676 € 338 €
20 yrs (chosen) 201,383 € 92,617 € 460 €
25 yrs 231,588 € 135,912 € 587 €

The last column brings the cost back to 1,000 € borrowed: it is the real price of stretching the term, at a constant payment.

A few UK and French acronyms come up below — HCSF, LTI — each marked with an asterisk and explained in the glossary at the end of the page.

Debt-to-income, and why 35% keeps coming up

Before the rate, before the term, a lender wants to know how much of a household's pay already goes on debt. The debt-to-income ratio (DTI) answers that, insurance included:

Debt-to-income = (total loan payments) / (net monthly income)

Most European lenders cluster around 35%, though the legal wrapper changes by country. France caps it at 35% over 25 years (HCSF*). The UK layers on a loan-to-income limit — typically about 4.5× annual income — plus an affordability stress test run at a higher notional rate. Germany, Spain and Italy have no single statute, but household-budget conventions land in the same neighbourhood. On 3,500 € a month, that puts the ceiling for all loans combined at 1,225 €.

DTI is not LTI*. One is a slice of each month; the other is a multiple of yearly pay. A long, cheap loan can look fine on DTI and fail LTI, or the reverse — which ratio a lender actually applies is worth checking before comparing a UK offer with a euro-area one. The cap in this calculator is editable for exactly that reason: the default 35% is a working middle, not a law of physics.

Residual income and payment shock

Two households at 35% are not equally comfortable. On 2,000 € of income, 1,300 € is left to live on; on 8,000 €, it is 5,200 €. Same ratio, very different month. Lenders therefore also look at residual income — what remains after the payments — often counted per head in the household. A thin residual can sink a file that technically sits inside the ratio.

The other tell is payment shock: the jump from today's rent to tomorrow's mortgage. A move from 700 € of rent to 1,200 € of credit shows up starkly on a bank statement, and a contained shock reassures underwriters almost as much as a tidy DTI. Current rent has no place in the "existing loan payments" box on this form, since it disappears the moment the purchase closes; a car loan does not disappear and stays in the box.

What "borrowing capacity" actually means

The figure produced here is the loan amount, not the price of the house. Reaching a purchase budget still requires adding the deposit and subtracting costs that never buy any bricks.

  • Deposit — often 10% or more, partly there to cover fees. A larger deposit does more than raise the budget: it usually improves the rate and cuts the lifetime cost, so the same capacity ends up funding a cheaper loan.
  • Purchase costs — stamp duty or transfer tax, notary or legal fees, valuation, broker. Across much of Europe that bundle runs around 7–10% and funds nothing but the transaction itself.

A blunt example: 250,000 € of capacity plus 30,000 € of deposit is not a 280,000 € house. Subtract roughly 20,000 € of costs on an existing-home purchase and the asking price that budget can actually meet lands closer to 260,000 €. The calculator adds loan and deposit automatically; the fees still need to be taken off by hand.

Term, rate, and the trade-off behind the table

Stretch the term and more capital fits inside the same monthly payment, because repayment is spread more slowly — at the cost of more interest paid over more years. The sensitivity table above puts euros on that trade-off, and the "cost per 1,000 € borrowed" column exists precisely so that 20 years can be compared with 25 without getting distracted by the bigger headline loan.

Move the rate half a point the other way and capacity falls with no change in income whatsoever — the entire purchasing-power story of a rate-hiking cycle in one line. Shopping around for the rate and the insurance is not cosmetic: it translates directly into more capital, or less of it, inside an identical monthly payment.

Loan insurance: the line that eats into the ratio

Death, disability, incapacity: this cover protects the lender and the borrower alike. It sits inside the DTI, so it shrinks the payment left over for capital and, with it, the borrowing capacity. Over 20 or 25 years the bill often runs to tens of thousands — occasionally in the same league as the interest itself.

In most countries the policy can be taken out elsewhere than the lending bank. For a young non-smoker, the in-house quote is frequently twice a third-party one. This page charges a flat yearly rate on the initial capital; some policies instead track the outstanding balance, so the premium falls as the loan is repaid. Where a quote works that way, the true lifetime cost ends up a little kinder than the figure shown here.

Which income actually counts

The "net income" box is not gross pay. Lenders typically take net salary and pensions, apply a haircut to rental income for vacancy and running costs, and look twice at overtime or one-off bonuses. A short contract, a probation period or a young self-employed file can still clear underwriting, usually in exchange for a bigger deposit or a smaller multiple.

Two incomes mean twice the payment capacity — provided both names sit on the loan. A joint application changes the ratio, the residual income and often the rate too; borrowing under a single name while the household earns two salaries leaves capacity unused without a specific reason to do so.

Loan-to-value, and why the deposit moves the rate

LTV is the loan expressed as a share of the property's value. The higher it climbs, the more a lender charges, since more of its own money sits exposed in the house. Moving from 90% LTV down to 80% is often worth more, in rate, than stretching the term by an extra year. A 100% loan still exists for strong files in some markets, but it remains the exception rather than the base case.

UK lenders add that 4.5× income cap plus a stress test run at a rate above the pay rate, to check whether repayment still holds if the Bank of England moves. Entering a slightly lower DTI in the form gives a crude stand-in for that test, though it is no substitute for a lender's own worksheet.

Limits of the calculation

This remains an estimate. A lender also weighs job stability, how the current account behaves, cash left over after completion, residual income per person, and any legal cap on the APR* (usury rate). A file that looks strong on paper can still fail if insurance and fees push the APR through that ceiling.

Insurance here is charged on the initial capital rather than the declining balance. Once a capacity figure is in hand, pricing a specific loan amount is best done with the mortgage monthly payment calculator.

Glossary

APR
Annual Percentage Rate: the total cost of borrowing expressed as a single yearly rate, fees and insurance included, used to compare loans on equal terms.
HCSF
Haut Conseil de Stabilité Financière: France's macroprudential regulator, which caps most mortgages at a 35% debt-to-income ratio over a maximum 25-year term.
LTI
Loan-to-income: the loan amount expressed as a multiple of annual income, a limit UK lenders apply alongside — and sometimes instead of — the debt-to-income ratio.

Related calculators