Machining Speeds and Feeds Calculators
Every calculator here turns on one quantity: cutting speed Vc, the speed at which the material passes the cutting edge, in metres per minute. The machine, though, only understands revolutions per minute — and the conversion depends on diameter: n = 1000 · Vc / (π · D). The same spindle setting therefore gives a completely different cutting speed on a 20 mm shaft and on a 200 mm faceplate.
Materials are grouped by the six ISO 513 groups — P steel, M stainless, K cast iron, N non-ferrous, S superalloys and titanium, H hardened — the same lettering printed on every insert box, with two extra groups added outside the standard for wood and plastics. Each page quotes a recommended range rather than a single number, and leaves cutting speed as the first field that can be overridden: a figure from the tooling maker outranks the generic band.
Beyond speed, each operation has its own limiting factor, and that is what the matching page puts front and centre: the changing diameter when facing, thrust force and pecking when drilling, radial chip thinning when milling, bar deflection when boring, the number of passes when threading, and the torque before the tap breaks when tapping.