EN

Rule of Three Calculator (Cross-Multiplication)

The rule of three finds a fourth value from three known values, whenever two quantities are proportional. « a corresponds to b, what does c correspond to? » — for a direct proportion (the most common case: prices, recipes, scale drawings) or an inverse proportion (when one quantity grows while the other shrinks, e.g. number of workers and time to finish a job).

Calculator

Three known values

Results

a corresponds to b, c corresponds to —

How a rule of three is calculated

Direct proportion: x = (b × c) / a

Inverse proportion: x = (a × b) / c

In a direct proportion, the ratio b/a stays constant, so x follows from "cross-multiplication" (b × c = a × x). In an inverse proportion, it's the product a × b that stays constant: as c grows, x shrinks in the same proportion.

Words followed by a star are defined in the glossary that closes the article.

Direct proportion: the ratio stays put

Ask one question before any number is typed. If one quantity doubles, does the other double with it, or does it fall by half?

If it doubles, the situation is a direct proportion*. Twice the flour, twice the scones. Twice the length of timber, twice the bill. A drawing at 1:50 enlarged twofold on the page doubles every real measurement. The ratio b/a stays put. That is the everyday case, and it is the default on this form: if 4 corresponds to 10, what does 6 correspond to?

A cheap check. Zero kilograms, zero pounds sterling? Direct. The graph through the origin is a straight line. Anything that misses the origin — a standing charge, a mixing bowl that is not scaled, a journey that starts with a fixed waiting time — is not a direct proportion, even if a stretch of it looks linear.

Inverse proportion: the product stays put

If doubling one quantity halves the other, the situation is an inverse proportion*. The product a × b is the thing that stays constant. More bricklayers on the same wall, fewer days. Faster along the same road, less time. Flip the drop-down and the formula flips with it: x = (a × b) / c instead of x = (b × c) / a.

Pick the wrong type and the answer is not slightly off. It is a different problem. Zero workers, infinite time? Inverse — and a zero in the third box then makes no sense at all, which is why the form refuses c = 0 on that setting.

Direct: x = (b × c) / a  ·  Inverse: x = (a × b) / c

Cross-multiplying a pair of equal ratios

Write the two ratios equal, then cross-multiply*. For “4 corresponds to 10, 6 corresponds to x”:

4 / 10 = 6 / x  ⇒  4 × x = 10 × 6  ⇒  x = (10 × 6) / 4 = 15

  1. Put the known ratio on the left and the unknown on the right, in the same order both sides.
  2. The two diagonal products are equal: 4 × x = 10 × 6.
  3. Divide through by 4. The recovery is x = (b × c) / a.

Same arithmetic as comparing 2/5 and 3/8 on the fraction page: the products a×d and b×c decide. Here one of the four slots is unknown, so the equality is solved rather than tested. Inverse work keeps the product, not the ratio. Four workers × 10 days = six workers × x days, so x = (4 × 10) / 6. That is the second formula on this page, with a, b and c sitting where they sit.

The unitary method, and the older “rule of three” label

UK classrooms often reach the same 15 by the unitary method*: 1 corresponds to 10/4 = 2.5, so 6 corresponds to 6 × 2.5 = 15. Same arithmetic, no special name. GCSE mark schemes print “unitary method”. An SAT item is more likely to say “solve the proportion” or “cross-multiply”.

“Rule of three” is older school-book English — three known values, a fourth to find — and it turns up in searches and in some textbooks. It is a label for this calculation, not a different method. What people actually type into a search box is “if 4 corresponds to 10, what about 6” or just “proportion calculator”. This page answers that request, under whichever name arrived with it.

Once the unknown is squared rather than linear, the tool changes. That is a quadratic equation, not a proportion.

Recipes, unit conversions and scale drawings

A scone mix for eight wants 350 g of flour. For twelve people, 8 → 350 g, 12 → x, and x = 525 g. Eggs get rounded: 2.5 eggs is not a useful instruction. Baking time, though, does not scale. A tray one-and-a-half times the size is not in the oven one-and-a-half times as long.

Unit conversions are the same move. 1 inch = 2.54 cm, so 5 inches are 12.7 cm. Four litres of emulsion at £10 become £15 for six litres. A speed in mph to km/h is one proportion (× 1.609); mph to metres per second is two, chained — see below.

On an architect's sheet at scale 1:50, 1 cm on paper is 50 cm in the room, 0.50 m. A wall drawn 16 cm long is 8 m. The other way: a 12 m garden becomes 24 cm on the sheet. Joiners, surveyors, model-makers live on this. Direct, always.

Workers and time: the classic inverse case

Six bricklayers finish a wall in 8 days. How long with four, same pace, same wall?

The work does not change: 6 × 8 = 48 worker-days. With four people, 48 / 4 = 12 days. That is x = (a × b) / c with a = 6, b = 8, c = 4. More people, less time. Inverse.

The textbook quietly assumes a lot: everyone works at the same rate, nobody waits for anybody, the wall divides without waste. One mixer, one hoist, one gate onto the street, and the model starts to lie. A later section comes back to that ceiling.

Situations that look proportional and are not

The arithmetic can be perfect and the answer wrong all the same, because the situation was never proportional.

  • Area of a square. A 3 m side gives 9 m². Double the side and the area does not double: 36 m², not 18. Area follows the square of the scale. Paint, tiles, carpet: a linear proportion is out by a factor of four if every length was doubled.
  • Roasting time. A 1.2 kg joint is not “1.2 times a kilo's time”. Heat comes in through the surface; the middle is a volume. Cookery tables are not proportions.
  • Standing charges. A taxi that starts at £3.50 plus £2 per mile is not y = kx. The £3.50 is an intercept. Cross-multiplying two fares as if they passed through the origin invents a rate that never existed.

A proportion does not create proportionality. It assumes it. If doubling the input neither doubles nor halves the output, stop: an area, a roasting time, mixed temperatures, a stepped tariff — none of those cross-multiply cleanly.

Speed, distance and time: which pairing is inverse

t = d / v already tells the story. Hold the distance still and a higher speed means a shorter time. Inverse. 180 miles at 60 mph: 3 hours. The same 180 miles at 90 mph: 2 hours. Not 3 × 90/60.

t = d / v  ; d = v × t  ; v = d / t

Watch the third pairing. Distance and speed, with time held still, are direct: in 2 hours, 60 mph covers 120 miles, 90 mph covers 180. Inverse proportion is not a property of “speed”. It depends on what is kept fixed. Same catch as the bricklayers: invert only while the work (here, the distance) stays the same.

Units have to match. Miles with mph, kilometres with km/h. Minutes against a speed in miles per hour, without converting the hour, is the usual forgotten factor of 60.

The constant of proportionality

y proportional to x means there is a k* with y = k × x. That k is just the ratio b/a from the form. In 4 → 10, k = 2.5, and 6 × 2.5 = 15. A price per kilo, a map scale, a flow rate, an exchange rate: those are k's.

direct: y = k × x  ; inverse: y = k / x

In the inverse case k is a product, not a ratio. 6 workers × 8 days = 48, and 48 / 4 = 12 days. The unit on k usually tells the story: £/kg, mph, worker-days. If that unit is nonsense (“pounds per bricklayer” for a duration), the wrong type has probably been picked.

Equal fractions say the same thing: a/b = c/x is two quotients set equal. Cancelling 4/10 down to 2/5 before cross-multiplying is optional. It just keeps the multiplications small.

Chained conversions

Sometimes the direct link is missing. Two that touch are to hand. Three inches into metres: inches → cm (× 2.54), then cm → m (÷ 100). 7.62 cm, hence 0.0762 m. Each hop is a direct proportion. Compose them; do not stir them into one “gut feel” fraction.

Currency via a third currency works the same way — pounds to dollars, dollars to euros — as does a flow rate: pints per minute into cubic metres per hour. Order matters less than keeping each ratio the right way up. Flip one hop by accident and the whole chain is junk.

This calculator does one hop. For a chain, feed the result back in, or write the product of the ratios on paper. Cleaner than one form fill where a, b and c no longer remember what they stood for.

When extra hands do not save time

The textbook gang of bricklayers are interchangeable, never idle, never in each other's way. A real site is not.

Three extra people on a scaffold built for two get in the way. One mixer, one hoist, one van-width gate, and that bottleneck sets the pace. The fourth and fifth pair of hands stop shortening the job; they wait. Software people tell the same story as Amdahl's law: the bit that cannot be parallelised caps the gain. Twenty for dinner is not five times four if the kitchen has one oven.

The inverse proportion gives a floor, not a forecast. It is the time needed if the work split with no loss. Once a tool, a patch of ground or a decision refuses to multiply, reality drifts — a little, or by a factor of two. Treat the result as a rough figure, not a handover date.

Percentages are a proportion with 100 in one box

“20% of 80” is 100 → 20, 80 → x, so x = 16. That is a direct proportion, and this calculator will do it. VAT, a discount, a reverse percentage, two cuts stacked on each other — those are the five usual percentage jobs, and they belong on the percentage calculator.

This page will not rehearse them. The trap of thinking that “take off 20%” undoes “add 20%”, or that two 20% cuts make 40%, is a percentage trap, not a proportion trap. Cross-multiplying a net and a gross as if 100 sat in the first box is fine; the finance page is simply the one that already names those boxes.

Glossary

Direct proportion
Two quantities that keep a constant ratio: if one doubles, so does the other. Written y = k × x, or a/b = c/x. Prices, recipes and scale drawings are the usual examples. The default setting on this form.
Inverse proportion
Two quantities that keep a constant product: if one doubles, the other halves. Written y = k / x, or a × b = c × x. Workers and time, speed and time at fixed distance. The second setting on this form.
Cross-multiplication
From a/b = c/x, the diagonal products are equal: a × x = b × c. Solving for x recovers x = (b × c) / a. The same move compares two fractions when all four slots are known.
Unitary method
Find what 1 corresponds to, then scale to the required amount. GCSE wording for the same arithmetic as cross-multiplication. “Rule of three” is an older name for the same three-knowns, one-unknown layout.
Constant of proportionality
The k in y = k × x (direct) or y = k / x (inverse). On this form, k is b/a in the direct case and a × b in the inverse case. Its unit — £/kg, mph, worker-days — is a check that the right type was chosen.

Related calculators