Circle Area and Circumference Calculator
A circle's radius is all it takes to work out its two most commonly needed measurements: the circumference (the distance around it, sometimes called its perimeter) and the area (the surface it encloses). Both formulas rely on the same constant, π (pi).
Enter the radius: the calculator returns the circumference, the area, and the matching diameter.
Radius of the circle
An asterisk marks a term defined in the glossary at the end.
What π actually is
Pi is not a fudge factor picked to make the sums look neat. It is the ratio of a circle's circumference to its diameter, and that ratio is the same for every circle. A coin, a roundabout, the rim of a saucepan: if the shape is genuinely circular, the ratio is π.
Written π ≈ 3.141 592 653 5…, it never terminates. The number is irrational*: no fraction p/q equals it exactly. Irrational does not mean “a bit vague”. The constant is exact. It is the decimal expansion that goes on for ever.
The calculator above uses the machine value of π, well beyond fifteen digits. For a radius taken off a tape measure, the first few are plenty. Swapping π for a convenient fraction and then pretending the two are the same is the move to avoid. The two working identities are short:
The unit dropdown is a label. Radius 4 stays 4; circumference and area come back in that unit and that unit squared. Switching centimetres to metres does not convert a previous entry.
Recovering the radius from area or circumference
Both formulae undo cleanly. If the distance round, or the area inside, is already known, the radius is sitting there waiting.
- From the circumference C: r = C ÷ (2π).
- From the area A: r = √(A ÷ π).
They are not interchangeable. Area needs a square root; circumference is a straight division. Take the positive root — a negative radius is meaningless. The usual blunder is to apply the wrong inverse: a root to a length, or a simple divide to an area.
r = C ÷ (2π) = √(A ÷ π)
Circle versus disc
In everyday English “circle” covers both the line and the filled-in shape. School geometry is fussier, and the fuss is worth knowing.
The circle is the curve: every point at a fixed distance from the centre. The disc* (sometimes spelled disk) is the interior. Circumference belongs to the circle; area belongs to the disc. A closed disc includes the boundary, an open one does not — a distinction that matters in analysis and almost never on a building site.
This page computes both and, like everyone else, talks about “a circle”. Keep the distinction so a length is not reported where a surface is wanted.
Circumference and perimeter
Perimeter is the distance around a shape. For a polygon the sides are added. A circle has no sides, so that distance has its own name: circumference*.
Both words are in circulation. A mark scheme that says “perimeter of the circle” is not wrong. A workshop drawing that says “circ.” is not wrong either. The formula does not care which word is used.
C = 2πr = πd
The diameter form is often handy. Same thing: d = 2r, so πd = 2πr. If a drawing gives the diameter and not the radius, this version saves a step. Among plane figures on this site, only the circle (and the sector cut from it) uses π in the outline; a regular polygon approaches the same circumference as the number of sides grows, but never writes π in the finite formula.
Sector, annulus and segment
The full disc is not the only piece ever needed. Three relatives turn up constantly.
A sector is a slice: two radii and the arc between them. An annulus is the ring between two concentric circles, area π(R² − r²). A circular segment is what is left of the sector once the triangular piece bounded by the two radii and the chord is cut away — the cap between chord and arc.
If only a slice is wanted, use the circular sector calculator. The area of the whole disc is just the sector of 360°. The incircle and circumcircle of a triangle are ordinary circles in this sense: C = 2πr and A = πr² apply to both, once the radius is known.
A circle of radius 4
Take r = 4 m, the default on the form.
- Diameter: 8 m.
- Circumference: 2 × π × 4 = 8π ≈ 25.133 m.
- Area: π × 4² = 16π ≈ 50.265 m².
Check the other way: 25.133 ÷ (2π) returns 4. So does √(50.265 ÷ π). If one of them does not, the unit or the radius has slipped — not π. The same 4 in centimetres would give 25.133 cm and 50.265 cm²; the algebra does not move.
Double the radius to 8. Circumference doubles, to 16π ≈ 50.265 m — the old area number, coincidentally, because 16π happens to equal 2 × 8π. Area quadruples, to 64π ≈ 201.06 m². Same scaling as a rectangle: lengths follow the factor, areas follow its square. That coincidence of 50.265 is a trap, not an identity.
22/7 is not π
22/7 ≈ 3.142 857. π ≈ 3.141 593. The gap is about 0.04%. Fine for a cake. On a machined disc two metres across it is already two and a half millimetres extra on the circumference.
355/113 is much closer (six correct decimals). Textbooks like 22/7 because it works on paper without a calculator. It is not a definition. This page keeps π.
If an exam paper says to take π as 22/7, do so — the mark scheme will. For a physical measurement, leave 22/7 in the textbook and use π.
Radius, not diameter
The form asks for the radius. If the diameter is what was measured, halve it first. That is the mistake that does not announce itself.
Entering 8 instead of 4 doubles the circumference — fair enough, C scales with r. The area is quadrupled, because of r². An 8 cm diameter is a 4 cm radius, not an 8 cm one.
A diameter is not a radius. Divide by two before it goes in the box.
Glossary
- Irrational number
- A real number that is not the ratio of two integers. π is irrational: no fraction equals it exactly, and its decimal expansion never repeats.
- Disc (disk)
- The filled-in interior of a circle, including or excluding the boundary according to whether the disc is closed or open. Area belongs to the disc; circumference belongs to the circle.
- Circumference
- The distance around a circle, C = 2πr = πd. It is the perimeter of the circle; the special name exists because a circle has no straight sides to add.