Rhombus Area and Perimeter Calculator
A rhombus can be worked out entirely from its two diagonals: they always cross at right angles and bisect each other, which is enough to recover the side length using the Pythagorean theorem — no need to measure it separately.
Enter the long and short diagonal: the calculator returns the area, the side length, and the perimeter.
The two diagonals
Technical terms followed by an asterisk are explained in the glossary at the end of the page.
Why the diagonals of a rhombus always meet at right angles
A rhombus* has four equal sides. Join opposite corners and the two diagonals cross. Each line is a mirror of the shape. At the crossing, the four little triangles that appear are right-angled. Not “usually”. Always.
Half of one diagonal, half of the other, and a side make a right-angled triangle, the side being the hypotenuse. Pythagoras applies in every inner corner. Were the angle at the centre anything but 90°, the four sides could not stay equal. On site that is the quick test: do the tapes cross square? If they do not, the figure is an ordinary parallelogram, or a shapeless four-sided figure, not a rhombus.
They bisect each other as well. Each diagonal is the perpendicular bisector of the other. The calculator uses that to recover the side: a right-angled triangle with legs D/2 and d/2. The unit dropdown labels the result; it does not convert the typed diagonals.
The square as a right-angled rhombus
A square has four equal sides. That already makes it a rhombus. It also has four 90° corners. That extra demand is the whole difference. Take a rhombus in modelling clay and square one angle up to a set-square: the other three follow, the diagonals become equal, and the figure is a square. There is no separate square page: a square is the rectangle with L = W, and the rhombus with equal diagonals.
In a leaning rhombus the diagonals are unequal. In a square they match. The area formula A = D × d / 2 remains valid; it collapses to A = D² / 2, and since D = c√2 the familiar A = c² comes back. Same number, two routes.
The square is the only quadrilateral that wears both hats. Four right angles (rectangle) and four equal sides (rhombus). Other rhombi do not have right angles. Other rectangles do not have equal sides.
What a parallelogram still lacks
Every rhombus is a parallelogram*. Opposite sides parallel, in two pairs. The converse is false. A parallelogram, in general, has only opposite sides equal. All four match only in the rhombus.
The diagonals of a plain parallelogram bisect each other, but not at right angles. They sit perpendicular if, and only if, the figure is a rhombus (or a square). A more hands-on test: measure the four edges. Four times the same length, it is a rhombus. Two different pairs, an ordinary parallelogram.
The parallelogram rule A = base × height works for a rhombus too. It gets less use, because the diagonals are often easier to tape than the height — on a tile already down, or on stretched mesh.
Recovering one diagonal from the area
A = (D × d) / 2 turns round with a doubling, then a division.
D = 2 × area ÷ d ; d = 2 × area ÷ D
Area 24, short diagonal 6: the long one is 8. That is the default example, read backwards. Handy once the covering and one of the two spans are known — a tile pattern locked to a grout line, a frame whose width is already fixed.
Without the second diagonal, area will not give the side. A very flat rhombus (diagonals 24 and 2) and a near-square one (8 and 6) both enclose 24. Perimeters nowhere near each other. One datum remains missing.
Area from a side and an included angle
The diagonals are not always to hand. A side and an angle — from a protractor, or off a drawing — are enough. The area is then the side squared, times the sine of that angle.
area = side² × sin(α)
α can be any of the four corners. sin(α) = sin(180° − α), and consecutive angles of a rhombus add to 180°. Taking the acute or the obtuse one yields the same sine, hence the same area. In the 8-and-6 example the side is 5 and the area 24, so sin(α) = 24/25 = 0.96, α ≈ 73.74°. The other corner is 106.26°. The triangle solver will recover that angle from the half-diagonals 4 and 3 if a cosine is preferred to a sine.
If α = 90°, sin(α) = 1 and A = c². Back to the square: the largest area available from a given side. Flatten the rhombus and the sine drops, the area shrinks — down to nothing, once the four vertices lie on a line.
Diagonals 8 and 6: a worked case
Long diagonal 8, short 6, same unit. The half-diagonals are 4 and 3. Pythagoras, and the side comes out whole.
area = (8 × 6) ÷ 2 = 24
side = √(4² + 3²) = √25 = 5
perimeter = 4 × 5 = 20
The 3-4-5 again. No rounding, no ugly root. If 8 and 6 are metres, 24 m² and 20 m of outline. If they are centimetres, 24 cm² and 20 cm. The bare 24 says nothing.
Backwards: area 24 and D = 8 give d = 6. Side 5 and area 24 give sin(α) = 24/25. Three readings, one rhombus.
For a fixed side, the square holds the most area
Hold the side still, let the angle move. A = c² sin(α) peaks when sin(α) = 1, so α = 90°. The rhombus has stood up into a square. Any other angle wastes area.
A 20 m run of outline, four sides of 5 m. As a square, 25 m². As the 8 × 6 rhombus, only 24 m². As a very flat one, diagonals 9.6 and 2.8, just 13.4 m². Same perimeter, nearly half the interior. If the point is to enclose as much as possible, square the corners. If the point is a long thin motif, that loss is the price.
A kite is not always a rhombus
In geometry a kite* has two pairs of adjacent equal sides. Its diagonals meet at right angles, but only one of them is a mirror line. A rhombus has all four sides equal: it is a very special kite, with two mirrors.
The area formula is the same in both cases — product of the diagonals, halved — because the diagonals stay perpendicular. The right-angled triangle made by the half-diagonals is enough to cut each panel. A rhombus is the symmetric member of that family, not a different animal. The rest of plane geometry on this site treats the rectangle, the trapezoid and the regular polygon as the other named four-siders; none of them is a rhombus unless the sides happen to match.
Glossary
- Rhombus
- A quadrilateral with all four sides equal. The diagonals bisect each other at right angles. British and American English both use this word for the shape; “lozenge” is a decorative term, not the geometric one.
- Parallelogram
- A quadrilateral with both pairs of opposite sides parallel. Opposite sides are equal, but adjacent sides need not be. A rhombus is the special case in which all four sides match.
- Kite (geometry)
- A quadrilateral with two pairs of adjacent equal sides. Its diagonals are perpendicular; only one of them is an axis of symmetry. A rhombus is a kite with all four sides equal.